TX200HC - 2021 setup

Post Reply
Mac
Site Admin
Posts: 972
Joined: Mon Jun 18, 2012 9:39 pm

TX200HC - 2021 setup

Post by Mac » Thu Jul 01, 2021 2:31 pm

With the 2021 season finally about to start, I figured it was time to select an action and set it up for the season

I chose the HC action that has the Tony Leech 22mm kit in it. With the JSB 8.44 in 4.52, it is every bit as accurate as my SR. One advantage is that the HC seems to balance better and is easier to keep steady in the standing and kneeling positions. Many matches have been won or lost on an individuals performance on these discipline lanes. Also, I have another HC action if I decide to stick with the HC. I could kit it out identical to the one shown in the pic and even have a scope mounted and sighted in. In case of trouble, all I would have to do is put the action into the stock and carry on.

The velocity is pretty consistent around 770 fps and that velocity seems to provide the best accuracy.

I may add a Rowan adjustable riser to the rig for the August match and see if that is something that adds or detracts from performance. Also waiting on a custom barrel weight to see if that cuts down on the vertical spread. It can be a game of millimetres between a knock down and a clip on the edge of a hit zone. Besides, tinkering is great fun and it forces you to shoot a lot more to see if things work. How can that be bad?
IMG_8225.jpg
IMG_8225.jpg (1.45 MiB) Viewed 2006 times
Tim
CAFTA Governor

Mac
Site Admin
Posts: 972
Joined: Mon Jun 18, 2012 9:39 pm

Re: TX200HC - 2021 setup

Post by Mac » Tue Jul 13, 2021 12:26 pm

Added the Rowan riser, so I hope this helps with different levels of elevation.
IMG_8295.jpg
IMG_8295.jpg (1.97 MiB) Viewed 1849 times
Tim
CAFTA Governor

Post Reply