Page 5 of 5

Re: TX200SR Mk1

Posted: Sun Aug 12, 2018 2:01 pm
by Mac
The attachment Rt Side close.jpg is no longer available
Rt Side close.jpg
Rt Side close.jpg (2.6 MiB) Viewed 334 times

Re: TX200SR Mk1

Posted: Sun Aug 12, 2018 2:02 pm
by Mac
Rt Full.jpg
Rt Full.jpg (2.84 MiB) Viewed 334 times

Re: TX200SR Mk1

Posted: Sun Aug 19, 2018 2:01 pm
by Mac
Now it's time to do some shooting. Switched the Sightron over to this rig and will be trying AA 7.87s. Ran it over the chrony and the AA pellets definitely shoot faster by about 15 fps. I hope there is a washer to take out, since that would certainly be the easiest way to slow it down. Do not really want to mess with the lubes and tune, since it shoots so well as is.

The left side is where I had to add the wood to make it right hand friendly. I kind of like the effect of the different wood.
The attachment Full Left Side.jpg is no longer available
Full Left Side.jpg
Full Left Side.jpg (1.88 MiB) Viewed 291 times

Re: TX200SR Mk1

Posted: Sun Aug 19, 2018 2:38 pm
by Mac
Full Right Side.jpg
Full Right Side.jpg (1.75 MiB) Viewed 290 times

Re: TX200SR Mk1

Posted: Tue Oct 30, 2018 1:48 pm
by Mac
Could not get use to Sightron; just felt wrong and offhand shooting really suffered. Put the Leupold back on and all was well.

I also retuned to 11.1 ft/lb and set it up quick before the last match. Ended up holding high and right to hit anything and sure enough, when I tried it at home the day after the match, it was shooting eight clicks low and four clicks left. Made the adjustment and it is back to hitting dead on.

Set up now for the worlds in England next August. Lots of practise and a good number of matches between now and then. We have high hopes for Canada’s springer team.