Tasco Custom Shop 8X-40X56mm Scope

Post Reply
Mac
Site Admin
Posts: 842
Joined: Mon Jun 18, 2012 9:39 pm

Tasco Custom Shop 8X-40X56mm Scope

Post by Mac » Mon Mar 04, 2019 9:13 pm

The scope is one of the early, made in Japan models with 30mm tube and works perfectly. It has 60 one quarter clicks per revolution of the turret in both elevation and windage. It has a custom made 3.75" side-wheel that is marked for ranges or you can create your own range tape for it. It comes in the original box with manual, original cleaning cloth, 3" sunshade and lens covers. Both turrets have covers, have very positive clicks and there are some small ring marks on the scope as can be seen in the photos. A small allen key is used to loosen the ring on the turrets to set the zero. The scope is in very good condition and I won a good number of FT matches using it. I actually have two of these and am not sure if I am going to sell the other one.

I am asking $350 firm, shipped or can be picked up at a Burlington or Grenville match.
Tasco.jpg
Tasco.jpg (2.59 MiB) Viewed 96 times
Tim
CAFTA Governor

Mac
Site Admin
Posts: 842
Joined: Mon Jun 18, 2012 9:39 pm

Re: Tasco Custom Shop 8X-40X56mm Scope

Post by Mac » Mon Mar 04, 2019 9:14 pm

Tasco Wheel & Turret.jpg
Tasco Wheel & Turret.jpg (1.79 MiB) Viewed 95 times
Tim
CAFTA Governor

Mac
Site Admin
Posts: 842
Joined: Mon Jun 18, 2012 9:39 pm

Re: Tasco Custom Shop 8X-40X56mm Scope

Post by Mac » Mon Mar 04, 2019 9:14 pm

Tasco Box.jpg
Tasco Box.jpg (2.07 MiB) Viewed 94 times
Tim
CAFTA Governor

Post Reply